14
2 – Wi-Fi Connection to the Router
When configuring the router for the first time, you will need
to establish a direct connection with the router in order to
access the web-based configuration utility.
Once you have configured your router, you will be able to
connect to the Internet using the Wi-Fi settings that you
have specified in the configuration process.
Before starting the setup process, ensure that the router is
powered on and has sufficient battery power.
Also make sure your PC is configured to obtain both IP and
DNS server addresses automatically. Please refer to your
system's documentation for instructions on how to do this.
To connect to the router using Wi-Fi, follow these steps.
1. Open your operating system’s wireless networking
utility and scan for available networks to connect to.
The default network name (SSID) of the 4G Router is
“Hamlet-4G-xxxx”, where “xxxx” represents the last
four character’s of the router’s MAC address.
2. Once you have located this network, click the
Connect
button.
3. You will then be prompted to enter the network security
key (Wi-Fi Key) for your router.
The Wi-Fi Key is printed on the rear panel of the router.
4. Enter the security key and click
OK
.
