4
2. Installation
1. Connect USB connector to the USB port of your computer.
2. Operating system detects and install the device automatically.
3. Connect a network cable (not included) to the adapter's Ethernet
(RJ45) port to access the local network and the Internet.
Important Note
Some versions of Windows may require driver installation for the
device to function properly. The driver can be installed from the
virtual CD utility that appears when the device is connected to the
computer.
3. Specifications
•
Network Standards:
IEEE 802.3: 10Base-T
IEEE 802.3u: 100Base-T
•
Data Transfer Rates:
Ethernet: 10Mbps (Half/Full Duplex)
Fast Ethernet: 100Mbps (Half/Full Duplex)
•
Data Bus: USB 2.0 (1.1 compliant)
•
Network Interface: female RJ45 jack
•
LED Indicator for power and data connection
•
Power Management: suspend mode, hibernation mode
•
Dimensions (without cable): 60 x 22 x 16 mm (L x W x H)
•
Cable length: 170 mm
•
Weight: 20 g
•
Operating Temperature: 0 to 70 °C
