HNWS108
108M Wireless Router User Guide
-
51
-
¾
Ignore Ping Packet from WAN Port
-
Enable
or
Disable
ignore ping packet from
WAN port. The default is disabled. If enabled, the ping packet from the Internet
cannot access the router.
¾
Forbid Ping Packet from LAN Port
-
Enable or Disable forbidding Ping Packet to
access the router from the LAN port. The default value is disabled. If enabled, the
ping packet from the LAN port cannot access the router. (Defends against some
viruses)
Click the
Save
button to save the settings.
Click the
Blocked DoS Host Table
button to display the DoS host table by blocking.
The page will appear that shown in figure 5-41:
Figure 5-41 Thwarted DoS Host Table
This page shows
Host IP Address
and
Host MAC Address
for each host blocked by
the router.
¾
Host IP Address-
The IP address that blocked by DoS are displayed here.
¾
Host MAC Address -
The MAC address that blocked by DoS are displayed here.
To update this page and to show the current blocked host, click on the
Refresh
button.
Click the
Clear All
button to clear all displayed entries. After the table is empty the
blocked host will regain the capability to access Internet.
Click the
Return
button to return to the
Advanced Security
page
5.9. Static Routing
A static route is a pre-determined path that network information must travel to reach a
specific host or network. To add or delete a route, work in the area under the Static
Routing page (shown in figure 5-42).
Figure 5-42 Static Routing
