Wireless ADSL2
+
Router
HRDSL300N
User Manual
40
Rule
• Rule Index:
Select 16 different rules, each rule’s detail can be set and saved.
• Active:
Select QoS is activated or deactivated.
• Application:
Select 11 different applications: IGMP, SIP, H.323, MGCP, SNMP, DNS, DHCP, RIP,
RSTP, RTCP, RTP.
• Physical Ports:
Once you select the application, the associated ports will be displayed.
• Destination MAC:
Set the Ethernet MAC value that you want to filter in destination side.
• Destination IP:
Set the IP address value that you want to filter in destination side.
• Destination Mask:
Set the subnet mask value that you want to filter in destination side.
• Destination Port Range:
Set the port range value that you want to filter in destination side.
• Source MAC:
Set the Ethernet MAC value that you want to filter in source side.
• Source IP:
Set the IP address value that you want to filter in source side.
• Source Mask:
Set the subnet mask value that you want to filter in source side.
• Source Port Range:
Set the port range value that you want to filter in source side.
• Protocol ID:
Set the protocol ID type that you want to filter.
• Vlan ID Range:
Set the Vlan value that you want to filter.
• IPP/DS Field:
Select IP QoS format.
• IP Precedence Range:
Select the IP precedence range.
• Type of Service:
Select 5 different type of service.
• DSCP Range:
Set the DSCP value that you want to filter.
• 802.1p:
Set the remarked new 802.1p priority value on the packet that fulfill every detail setting
condition of each rule.
Action
After finishing all rules detail condition setting, select the rule you want to execute and action here.
• IPP/DS Field:
Select IP QoS format.
• IP Precedence Remarking:
Select the remarking value of IP precedence.
• Type of service Remarking:
Select the remarking value of type of service.
• DSCP Remarking:
Select the remarking value of DSCP.
• 802.1p Remarking:
Select the remarking value of 802.1p.
• Queue #:
Select four types of Queue: Low, Medium, High, Highest.
