Wireless ADSL Router
HRDSL521W
43
NOTE
If you have disabled the NAT option in the WAN-ISP section, the Virtual Server function
will hence be invalid. If the DHCP server option is enabled, you have to be very careful in
assigning the IP addresses of the virtual servers in order to avoid conflicts. The easiest
way of configuring Virtual Servers is to manually assign static IP address to each virtual
server PC, with an address that does not fall into the range of IP addresses that are to be
issued by the DHCP server. You can configure the virtual server IP address manually, but
it must still be in the same subnet as the router.
4.3.4 ADSL
ADSL Mode:
The default setting is
Auto Sync-UP
. This mode will automatically detect
your ADSL, ADSL2+, ADSL2, G.dmt, G.lite, and T1.413. But in some area, multimode
cannot detect the ADSL line code well. If it is the case, please adjust the ADSL line code to
G.dmt or T1.413 first. If it still fails, please try the other values such as ALCTL, ADI, etc.
ADSL Type:
There are five modes “Open Annex Type and Follow DSLAM’s
Setting”, ”Annex A”, ”Annex I”, “Annex A/L”, ”Annex M” and “Annex A/I/L/M” that user can
select for this connection.
