60
Use
Machining the workpiece
Fig. 44: Planing
1.
Take note of general procedures for permitted working methods.
9.2.5 ‘Work process with permitted working methods’ on page 58
2.
Place hands on the workpiece in a closed position with the thumbs firmly
against them.
3.
Push the workpiece under the protective guard with both hands.
4.
As soon as the workpiece has moved far enough onto the outfeed planer
table, place your left hand onto it and push it evenly over the cutterblock.
5.
Move the workpiece back over the protective guard into the starting posi-
tion.
9.3.2
Planing the narrow edge
Fig. 45: Planing - Planing the narrow edge
1.
Take note of general procedures for permitted working methods.
9.2.5 ‘Work process with permitted working methods’ on page 58
2.
Place the protective guard on the planer table and cover all the cutterblock,
with the exception of the width of the workpiece.
3.
Press the workpiece against the planer fence and guide evenly over the
cutterblock.
4.
As soon as the workpiece has moved far enough onto the outfeed planer
table, place your left hand onto it and push it evenly over the cutterblock.
5.
Move the workpiece back over the protective guard into the starting posi-
tion.
