27
Planer-Thicknesser
A3-26 / A3-31 / A3-41
6.3 Transport inspection
Upon arrival, inspect the shipment to ensure that it is
complete and has not suffered any damage. If any trans-
port damage is visible, do not accept the
delivery or only accept it with reservation. Record the
scope of the damage on the transport documents/
delivery note. Initiate the complaint process. For all
defects that are not discovered upon delivery, be sure to
report them as soon as they are recognised as damage
claims must be filed within a certain period, as granted
by law.
6.4 Packaging
If no agreement has been made with the supplier to take
back the packaging materials, help to protect the
environment by reusing the materials or separating them
according to type and size for recycling.
Note: Help preserve the environment! Packaging materials are valuable raw materials and in many cases,
they can be used again or expediently reprocessed or recycled.
Attention! Dispose of the packaging materials in an environmentally friendly way and always in
accordance with local waste disposal regulations. If applicable, contract a recycling firm to dispose of the
packaging materials.
6.5 Storage
Keep items sealed in their packaging until they are
assembled/installed and be sure to observe the stacking
and storage symbols on the outside of the packaging.
Store packed items only under the following conditions
• Do not store outdoors.
• Store in a dry and dust-free environment.
• Do not expose to aggressive substances.
• Protect from direct sunlight.
• Avoid subjecting the machine to shocks.
• Storage temperature: –10° to +50 °C
• Maximum humidity 60 %
• Avoid extreme temperature fluctuations
(condensation build-up)
• Apply a coat of oil to all machine parts open to
possible rusting (corrosion protection)
• When storing for a period longer than 3 months,
apply a coat of oil to all machine parts open to
rusting (corrosion protection) Regularly check the
general condition of all parts and the packaging. If
necessary, refresh or re-apply the coat of
anti-corrosive agent.
• If the machine is to be stored in a damp environment,
it must be sealed in airtight packaging and protected
against corrosion
(desiccant)
• If the machine will not be used for a longer period of
time, ensure that the gear lever is positioned on the
„0“ setting.
Transport, packaging and storage
Summary of Contents for A3-26
Page 64: ...64 Planer Thicknesser A3 26 A3 31 A3 41...
Page 65: ...65 Planer Thicknesser A3 26 A3 31 A3 41...
Page 68: ......
Page 69: ......
