18
19
Belt Sanders
HS 2200
Belt Sanders
HS 2200
6.5 Storage
Keep items sealed in their packaging until they are
assembled/installed and be sure to observe the stacking
and storage symbols on the outside of the packaging.
Store packed items only under the following conditions:
• Do not store outdoors.
• Store in a dry and dust-free environment.
• Do not expose to aggressive substances.
• Protect from direct sunlight.
• Avoid subjecting the machine to shocks.
• Storage temperature: -10° to +50° C.
• Maximum humidity: 60%.
• Avoid extreme temperature fluctuations (condensation
build-up).
• Apply a coat of oil to all bare machine parts (corro-
sion protection).
• When storing for longer than 3 months, apply a coat
of oil to all bare machine parts (corrosion protec-
tion). Regularly check the general condition of all
parts and the packaging. If necessary, refresh or re-
apply the coat of anti-corrosive agent.
• If the machine is to be stored in a damp environment,
it must be sealed in air-tight packaging and protected
against corrosion (desiccant).
6.3 Transport inspection
Upon arrival, inspect the shipment to ensure that it is
complete and has not suffered any damage.
If any transport damage is visible, do not accept the de-
livery or accept it only with reservation. Record the scope
of the damage on the transport documents/delivery note.
Initiate the complaint process.
6.4 Packaging
If no agreement has been made with the supplier to take
back the packaging materials, help to protect the envi-
ronment by reusing the materials or separating them ac-
cording to type and size for recycling.
Attention! Dispose of the packaging materials in an environmentally friendly way and always in accord-
ance with local waste disposal regulations. If applicable, contract a recycling firm to dispose of the pack-
aging materials.
Attention: Help preserve the environment! Packaging materials are valuable raw materials and in many
cases they can be used again or expediently reprocessed or recycled.
For all defects that are not discovered upon delivery, be
sure to report them as soon as they are recognized be-
cause claims for damage must be filed within a certain
period, as granted by law.
Transport, packaging and storage
