26
27
"
!
"
!
Belt Sanders
HS 2200
Belt Sanders
HS 2200
Making adjustments and preparations
8.5 Infeed fence
Fig. 11: Infeed fence
The workpiece stop can be continuously adjusted along
the holding bar and clamped in any position via the
clamping lever.
It especially prevents small workpieces from being car-
ried by the sanding belt due to friction.
!
Holding bar
"
Clamping lever
8.3 Table height adjustment and maneuvering
Fig. 10: Table height adjustment and maneuvering
The height of worktable can be continuously adjusted via
the handwheel. Also the position can be changed via the
holding bar.
!
Hand wheel
"
Holding bar
8.4 Sanding carriage
The sanding carriage can be moved along the sanding
carriage bar via the grip.
Grip also simultaneously presses the sanding belt onto
the workpiece.
After opening screw, the depth of grip can be continu-
ously adjusted.
After opening clamping screw, counterweight can be
continuously adjusted along the shaft according to your
specific preferences.