9
Panel Saw
K3 basic/K3 winner/K3 e-classic
2 Safety
At the time of its development and production, the ma-
chine was built in accordance with prevailing technologi-
cal regulations and therefore conforms to industry safety
standards.
However, hazards may arise should the machine be
operated by untrained personnel, be used improperly or
employed for purposes other than those it was designed
for. The chapter entitled „Safety“ offers an overview of
all the important safety considerations necessary to opti-
mise safety and ensure the safe and trouble-free opera-
tion of the machine.
Additionally, in order to further minimise risks, the other
chapters of this manual contain specific safety instruc-
tions, all marked with symbols. Besides the various
instructions, there are a number of pictograms, signs and
labels affixed to the machine that must also be heeded.
These must be kept visible and legible and may not be
removed.
2.1 Intended use
The HAMMER K3 basic/K3 winner circular saw is only
to be used to machine wood or other machinable mate-
rials. Working materials other than wood is only permit-
ted with the express written consent of the manufacturer.
Operational safety is guaranteed only when the machine
is used for its intended purposes.
Attention: Any other application above and beyond the intended purposes is considered improper use and is
therefore not permitted. All claims regarding damage resulting from improper use that are made against the
manufacturer and its authorized representatives shall be rejected. The operator shall be solely liable for any
damage that results from improper use of the machine.
The term „proper use“ also refers to correctly observing
the operating conditions as well as the specifications and
instructions in this manual.
The machine may only be operated with parts and origi-
nal accessories from the manufacturer.
2.2 Manual contents
All those appointed to work on or with the machine must
have fully read and understood the manual before com-
mencing any work. This requirement must be met even
if the appointed person is familiar with the operation of
such a machine or a similar one, or has been trained by
the manufacturer.
Knowledge about the contents of this manual is a
prerequisite for protecting personnel from hazards and
avoiding mistakes so that the machine may be operated
in a safe and trouble-free manner. It is recommended
that the operator requests proof from the personnel that
the contents of the manual have in fact been read and
understood.
2.3 Making changes and modifications to the machine
In order to minimise risks and to ensure optimal perform-
ance, it is strictly prohibited to alter, retrofit or modify the
machine in any way without the express consent of the
manufacturer.
All the pictograms, signs and labels affixed to the
machine must be kept visible, readable and may not be
removed. Pictograms, signs and labels that have become
damaged or unreadable must be replaced promptly.
Safety
