Operation
Fig. 20: Saw blade guide
7.5.2.1 Upper blade guide
7.5.2.2 Lower blade guide
!
Guide rollers
"
Support roller
#
Clamping screw
The side guide rollers should touch the saw blade slightly
so as to obtain a straight and vibration-free cut.
The rear support roller prevents the saw blade thrusting
backwards whilst cutting.
To adjust the position of the rollers, simply loosen the
clamping screw.
7.5.2 Adjusting the saw blade guide
Do not change settings whilst the machine is in opera-
tion!
The upper saw blade guide has to be lowered as
closely as possible to the work-piece (5-10 mm). To set
the height, open the clamping screw and turn the hand
wheel until the desired height has been reached. Tighten
the clamping screw once again.
Fig. 19: Guide rollers
!
Guide rollers
"
Support roller
#
Clamping screw
26
!
"
#
!
"
#
Summary of Contents for N4400
Page 33: ...Bandsaw N4400 33...
Page 41: ......