ADJUSTMENTS
AND
TESTING
ANTEA 50 BT – BTS - BTO
Doc.
10059284
Issued
12/2016
Ver.
AC
Page
19 of 25
Hydraulic installation
1. Check the cleanliness and functionality of the
solution
tank plug
and
fast water-detergent filling cap
.
2. Check the cleanliness and sealing of the
solution filter
.
3. Fill up the solution tank.
4. Check hoses sealing,
solenoid valve
(on the brush base)
and
water valve
.
5. Verify that when the water valve is open, the solution
arrive continuously onto the floor.
6. Check the
detergent tank drain and level hose
.