ADJUSTMENTS
AND
TESTING
ANTEA 50 BT – BTS - BTO
Doc.
10059284
Issued
12/2016
Ver.
AC
Page
6 of 25
Steering wheel function – “
user
menu
” and “
advanced menu
” (next)
To modify a parameter value, act as follow:
•
Scroll and move inside the submenu, using the “key 1” and the “key 3”, until finding the
parameter to modify.
•
Use the “key 4” and the “key 6” display the admissible values related to the parameter to
change.
•
Use the “key 2” to setup the new parameter value.
•
To confirm the new parameter value it is needed to go back to working mode. Select the
submenu “exit” to go out from the “
user menu
”.
Ex. Modify the language setting from IT to EN.
1.
Switch off the machine by switching the key in OFF position.
2.
Enter the “
user menu
”. Press at the same time, with machine off, “key 4” and the “key
6” .
3.
Keeping pressed the mentioned buttons, rotate the key in ON position. Wait for the
loading of “
user menu
” text interface.
4.
Once loaded the “
user menu
”, use the “key 1” and the “key 3” to find out the submenu
“l
anguage
”.
5.
Use the “key 4” and the “key 6” to visualize the admissible values for the
language
parameter
and find out the value EN.
6.
Use the “key 2” to setup the new parameter value as EN.
7.
To confirm the new parameter value (EN) it is needed to go back to working mode. Select
the submenu “exit” to go out from the “
user menu
”. Press the “key 2” to confirm the
action.