2016-08
6
/
12
-
-
5
-
-
5
5.4 - PERIODICAL MAINTENANCE
NOTICE:
It is recommended to contact an authorised service centre regarding the periodical
maintenance operations.
5.4.a - DISASSEMBLING AND CLEANING THE DUST FILTER
- Extract the waste box.
- Unscrew the screws (2) and remove the cover giving access to the dust fi lter cover (1).
- Unscrew and remove the handle (3).
- Release the screws (4), then lower the dust fi lter (5) and extract it.
CAUTION:
The fi lter may ONLY be cleaned with a dust suction unit, whereby the fi lter
itself must be dry and its bags must be vacuumed one by one.
To avoid any damage during the cleaning process:
-
DO NOT use mechanical methods (brushing, scraping, etc.).
-
DO NOT wash the fi lter (in washing machine, by hand, etc.).
-
DO NOT use cleaners.
-
DO NOT use jets under pressure (air, water, cleaning solutions, etc.).
Replace the fi lter if it is fouled and/or damaged. Apply to an authorized Assistance
Service Center.
- Reassemble
the
fi lter (5) and fasten it correctly with its screws (4).
- Put the cover (1) back in position, tighten the screws (2), screw the handle (3) and put
the waste box in its lodging.
CA:
Authorized Technical Assistance Center
Operation
every 200
hours
(four-monthly)
every 500
hours
(yearly)
CA
paragraph
Disassemble and clean the dust fi lter
●
●
5.4.a
Check / replace the electrical motor carbon
brushes
●
●
-
Check the wear of the driving belts
●
●
5.4.b
Summary of Contents for 900SX
Page 15: ...2016 08 12 12 1 1...
Page 18: ...2016 08 3 6 2 1 2 4 3 5...
