12
4V LITHIUM-ION SCREWDRIVER
OPERATING INSTRUCTIONS
4. LED Worklight
Your tool is equipped with an LED worklight,
illuminating when the trigger is squeezed.
This provides additional light on the
surface of the work piece for operation in
lower-light areas. The LED worklight will
automatically turn on when depressing the
trigger switch, and turn off after the trigger
switch is released.
5. Install and Remove Bits
Your tool is equipped with a magnetic bit
holder, making bit installing and removing
very easy.
Lock the trigger switch “OFF” by placing the
direction-of-rotation selector in the center
position.
To install the bit:
Insert the bit into the holder. The built-in
magnet will help to securely hold the bit in
place.
To remove the bit:
Just pull the bit out of the holder.
WARNING:
Use protective gloves when removing the bit from the tool, or first allow
the bit to cool down . The bit may be hot after prolonged use .
4
5
LED
worklight
