18
6.0 AMP HAMMER DRILL
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The motor does not
start
The tool is not connected to a
power source
Connect the tool to a power
source
The bit cannot be
installed
1. The sleeve is not released
2. The bit does not fit the chuck
jaw
1. Release the sleeve
2. Use the appropriate bit
The motor is
overheating
Cooling vents are obstructed
Clean and clear vents. Do
not cover with hand during
operation
3 YEAR LIMITED WARRANTY
This hammer drill is warranted to the original purchaser from the original purchase date for
two years, plus one additional year with product registration at www.hammerheadtools.com
(2+1), for a total three years subject to the warranty coverage described herein.
Please retain your receipt.
This hammer drill is warranted to the original user to be free from defects in material
and workmanship. If you believe that the hammer drill is defective at any time during the
specified warranty period, call HAMMERHEAD support at 1-877-888-1880 to speak with a
customer service agent. This warranty does not cover: (1) Part failure due to normal wear or
tool abuse (2) Any parts have been altered or modified by anyone other than an authorized
HAMMERHEAD personnel.
This warranty excludes bits, bulbs and accessories. This warranty gives you specific legal
rights, and you may also have other rights that vary from state.
