HG2200/HG2200AT Operator’s
Manual
50 Hour
116 - Service
Check Hydraulic Hoses
Check hydraulic hoses for leaks every 50 hours of
operation.
Pressurized fluid or air could pierce skin and cause
severe injury. Refer to operator’s manual for proper use.
To help avoid injury:
•
Use a piece of cardboard or wood, rather than hands, to search for leaks.
•
Wear protective clothing, including gloves and eye protection.
•
Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure.
•
Lower, block, or support any raised component with a hoist.
•
Cover connection with heavy cloth and loosen connector nut slightly to relieve residual pressure.
Catch all fluid in a container.
•
Before using system, check that all connections are tight and all lines are undamaged.
•
If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.
Summary of Contents for HG2200AT
