HG2200/HG2200AT Operator’s
Manual
500 Hour
Service - 123
Change Engine Coolant
Drain and clean cooling system every year or 1000
hours.
To change:
1. Remove drain plug (1) and drain old coolant.
2. Fill radiator with clean water at fill (2).
3. Check for signs of rust and add cooling system
cleaner to the water if necessary.
4. Run engine long enough to ensure thermostat
has opened.
5. Let system cool, drain water.
6. Add coolant at fill. Do not fill to the top.
7. Run engine until mixture has circulated in the system.
8. Add 3.25 oz (97 cc) of Fleetguard DCA4.
9. Finish filling radiator with DEAC.
NOTICE:
See “Approved Coolant” on page 106.
j64om050w.eps
1
2
Summary of Contents for HG2200AT
