HG2200/HG2200AT Operator’s Manual
Intended Use
Overview - 3
Intended Use
HammerHead
®
winches are intended for pedestrian controlled pipe bursting, pipe slitting, slip lining, and
cable pulling. The HG2200 HydroGuide
®
Winch is a dual capstan design winch with the capacity of
utilizing multiple sizes of wire cable. The HG2200 provides up to 22 tons (20 tonnes) of constant tension
for pipe bursting, pipe slitting, slip lining, and cable pulling.
The unit is designed for operation in temperatures typically experienced in earth moving and construction
work environments. Contact your HammerHead dealer for provisions required for operating in extreme
temperatures. Use in any other way is considered contrary to the intended use.
HammerHead pipe bursters and power units should be operated, serviced, and repaired only by persons
familiar with their particular characteristics and acquainted with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.
Summary of Contents for HG2200AT
