background image

ATTACHING THE DEBRIS BAG

CHOOSE THE RIGHT BAG FOR THE JOB

HH1502 COARSE BAG

 "THE HURRICANE"

SUGGESTED USE: Heavy debris where a second cleaning is a given - Spring clean-ups and start-ups, too. Also 

comes in an XL size as part number HH1502XL (46" long). True micron rating: 800

HH1506 STANDARD BAG

SUGGESTED USE: Best for larger debris and coarser sand and gravel particles. Also comes in an XL size as part 

number HH1506XL (46" long). True micron rating: 200

HH1508 SUPERFINE BAG

SUGGESTED USE: Smaller and larger debris, dust and fine sand. Use this bag when the pool is mostly clean. Good 

everyday bag to use once the pool is up and running normally. Also comes in an XL size as part number HH1506XL (46" 

long). True micron rating: 150

HH1510 ULTRAFINE BAG "THE VOLCANO"

 (patented)

SUGGESTED USE: Use this bag for special cleanup and when the pool is mostly clean. Patented, no-leak design. 

Tested to pick up approximately 95% of fire ash and DE powder. True micron rating: 75 

Hammer-Head bags are all handmade here in the USA from chemical resistant materials and feature a no-slip cleat/

string attachment and color-coded tags for quick identification. They are reusable and with proper care will provide 

months of professional service. Bags should be stored clean and dry, and you should avoid dragging or scuffing them 

on the pool bottom, the pool deck, coping or any other rough surface. Bags can be punctured by sharp objects such as 

twigs, sticks, rocks, or glass. Please use care when vacuuming to prolong the life of your debris bag. 

Remove the bag 

before driving to your next pool. 

Transporting the Hammer-Head unit on the back of your vehicle while the debris bag is 

on the vacuum head will shorten the bag's life.

The best way to clean a Hammer-Head bag is to turn it inside out. Shake the debris out of the bag and rinse with a 

garden hose if necessary. Because of the fine debris it picks up, turning inside out and rinsing is the best way to clean

 

the HH1510 Volcano bag.

USER GUIDE  8

hammerheadvac.com/learn

V1.2 2/1/18

8

Summary of Contents for SERVICE-21















Reviews: