HAMMOND
MANUFACTURING
TM
TOOL BOX
BUL86338
REV. B
PAGE 1 OF 2
www.hammondmfg.com
INSTRUCTION
A) Remove factory installed escutcheon plate (see Step 1).
B) Remove bottom lockrod by first removing nuts from lockrod
guides (see Step 2), then rotating the lockrod 45 degrees upwards
and dis-engaging lockrod from the ratchet gear
(see Step 3).
C ) Remove ratchet gear by rotating 45 degrees upwards,
dis-engage from the top lockrod then rotate 180 degrees (see Step
4), then re-install ratchet gear with bottom lockrod as shown (see
Step 5) and re-install nuts for lockrod guides.
Phillips
Screw Driver
Step 1
Step 2
lock rod
lock rod
guide
escutcheon
plate
ratchet
gear
Detail A
A
Step 3
7/16" (thin wall) Socket
Wrench
Step 4
180 degree
rotation
ratchet
gear
lock rod
ratchet
gear
HMEHSKL/PL - SERIES
ASSEMBLY INSTRUCTIONS FOR
HMEHSKL/PL SWING HANDLE
