HAMMOND
MANUFACTURING
TM
TOOL BOX
www.hammondmfg.com
FIG. 4
4. Install vertical rails. (Fig. 4)
a) Insert 1/4-20 screw through slot in vertical rail hinge side. Tighten screw by hand.
b) Adjust vertical rails to desired location and tighten screw using 3/8 wrench.
c) Repeat steps for vertical rail lock side.
3
11
FIG. 5
5. Install 1/4 turn latches. (Fig. 5)
a) Remove nut from 1/4 turn latchs.
b) Insert 1/4 turn latch through finger pull.
c) Insert 1/4 turn latch into swing panel latch cut out.
d) Ensure latches rotate as shown. (Fig. 6)
e) Install nut back onto 1/4 turn latches.
FIG. 6
RANGE OF MOTION
OPPOSITE WAY FOR
OTHER LOCK
ECLIPSE SERIES
ASSEMBLY INSTRUCTIONS FOR
SWING PANEL AND SWING FRAME
BUL10120
REV. H
PAGE 3 OF 4
5/32 ALLEN KEY
3/8,7/16" Socket
Wrench
3/8 or 7/16
Open
Wrench
Centre
Punch
Drill, use
.281(7.1mm) BIT
