Hammond SK1, Special Utility Features

3

Special Utility Features              

3.

Now touch the ENTER Touch Button 

once

.  The Information Center Display should now look like this:

WARNING!:

  Doing any of the following procedures will erase all parameters, settings and registrations, returning the

instrument to the original Hammond factory default settings.

Use the PAGE LEFT and PAGE RIGHT Touch Buttons to select which portions of the instrument will be reset with
factory-default settings.  The data chart below shows the options you may select.

DEFAULT Options

Description

Function

MANUAL

Resets the contents of the MANUAL Touch Tab.  You can use this feature to create a “clean
slate” for new Patch settings.

PATCH

Resets the User Patches.  Use the VALUE Rotary Control to select the Patch you want to
initialize.  You can select from  “U001" to “U100" and “ALL” (all user patches).

GLOBAL

Resets the Global Param eters (Master Tune, Foot Switch assignm ents, etc.)

LESLIE

Resets the contents of the internal Leslie cabinets.  Use the VALUE Rotary Control to select
the Leslie Cabinet you want to initialize.  You can select from  “U1" through“U8" and “ALL”
(all User cabinets).

LIBRARY

Deletes all of the Extra Voice Library voices, leaving only the onboard voices.

ALL

Resets the entire instrum ent.

NOTE:  

You can also perform  a DEFAULT ALL by turning the Power “ON” while pressing and holding the

RECORD Touch Button.

After you have made your selection, touch the ENTER Touch Button to reset the instrument to the default settings
you have chosen.  If you DO NOT wish to Reset, touch either the PLAY or the MENU/EXIT Touch Button.