Setting the Parameters
55
SUSTAIN
This is the function that the volume slowly fades out
after the key is released, not like that of the
synthesizers.
8.
FOLD-BACK - HIGH
This allows you to set which key the 1' Drawbar starts to FOLD-BACK (= repeat the
same octave) in the upper-most range. The set range is 4G - 5C.
NOTE:
The FOLD-BACK can be set not only on the 1' but also 1 1/3', 1 3/5', 2' and 2 2/3'
Drawbars.
Setting the PEDAL
9.
TONE-WHEELS
This allows you to select the Tone-wheel waveform of the PEDAL.
Normal:
The traditional B-3/C-3 Tone-wheel sound
Muted:
Analog sound represented by the X-5.
Synth1:
Sawtooth waveform with swept filter.
Synth2:
Dull square waveform.
NOTE:
You can come to this page by holding down the [MANUAL BASS] Button as well.
10. ATTACK
This allows you to set the Attack Rate and the Key-Click Volume at ATTACK and
RELEASE.
MAX CLK:
Immediately attacks and the key-click is loud.
NORM CLK: Immediately attacks and the key-click is normal.
SOFT CLK:
Immediately attacks and the key-click is soft.
NO CLK:
A slightly slower attacks without key-click
SLOW ATK: Slow attack without key-click
11. DECAY RATE
This allows you to determine whether to keep voicing or to decay, or set the decay
time, while holding down the key.
The setting range is 1 - 5 and C. The longer the value gets, the longer gets the decay
time. No decay at C.
12. SUSTAIN - ON
This allows you to set whether or not to use the Sustain function.
13. SUSTAIN - LENGTH
This allows you to set the Release Rate (= the decay time after you release the key),
when the SUSTAIN - ON (item #12) is ON.
1 is the shortest. And 5 is the longest.
14. VELOCITY
This allows you to set the response to the Velocity. The setting range is OF and 1 - 4.
At OF, the volume does not change however hard you touch the key. As the value
increases from 1 - 4, the sound gets louder even if you touch the key softly.
15. KEY MODE
This allows you to set the Pedal polyphony.
POLY:
Makes it possible to play chords (up to 3 notes)
MONO:
Only the lowest note will sound, when you play a chord.
NOTE:
The previously relased note will be cut when you touch the new one, even when
the PEDAL is in the POLY mode and SUSTAIN is ON.
NOTE:
When the note-data of the Pedal are received from the MIDI IN terminal while the
value of the parameter [MIDI IN] (P. 84 #2) is “IN1/IN2”, the Pedal produces
polyphonic sound, regardless of the value.
NOTE:
All the parameters in these modes are Preset Parameters. They are recorded into
the Combination Preset.
VELOCITY
“Velocity” is the speed a key is depressed.
When you touch the piano hard, the hammer hits the
string hard and so the sound is loud.
The organ key is, on the other hand, generally only
the switch to open the valve, and so the sound does
not change however hard you may touch the key.
So this function is effective if you use when the
Decay Rate is other than C, or Decay.
Summary of Contents for XK-1
