*#1
:-
Owner’s Manual
150
MIDI IMPLEMENTATION
CHANNEL VOICE MESSAGE
Note Off
Status
2nd Byte 3rd Byte
8nH
kkH
vvH, or
9nH
kkH
00H
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
kk=Note Number:
00H - 7FH (0 - 127)
vv=Velocity(disregard):
00H - 7FH (0 - 127)
Note On
Status
2nd Byte 3rd Byte
9nH
kkH
vvH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
kk=Note Number:
00H - 7FH (0 - 127)
vv=Velocity:
00H - 7FH (0 - 127)
Control Change
The value set by the Control Change is not reset even when Program Change
messages etc. are received.
Bank Select (CC#0, 32)
Status
2nd Byte 3rd Byte
BnH
00H
mmH
BnH
20H
llH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
mm,ll=Bank Number:
00 00H=User
01 00H=Preset
Until you send the Program Change, the Bank Select process is reserved.
Volume (CC#7)
Status
2nd Byte 3rd Byte
BnH
07H
vvH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
vv=Volume:
00H - 7FH (0 - 127)
Expression (CC#11)
Status
2nd Byte 3rd Byte
BnH
0BH
vvH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
vv=Expression:
00H - 7FH (0 - 127)
Spring Shock (CC#48)
Status
2nd Byte 3rd Byte
BnH
30H
vvH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
vv=Velocity:
00H - 7FH (0 - 127)
Glide (CC#49)
Status
2nd Byte 3rd Byte
BnH
31H
vvH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
vv=Control Value:
00H - 7FH (0 - 127)
0 - 63=Off, 64 - 127=On
Damper (CC#64)
Status
2nd Byte 3rd Byte
BnH
40H
vvH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
vv=Control Value:
00H - 7FH (0 - 127)
0 - 63=Off, 64 - 127=On
Sustain (CC#69)
Status
2nd Byte 3rd Byte
BnH
45H
vvH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
vv=Control Value:
00H - 7FH (0 - 127)
0 - 63=Off, 64 - 127=On
Leslie Fast (CC#92)
Status
2nd Byte 3rd Byte
BnH
5CH
vvH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
vv=Control Value:
00H - 7FH (0 - 127)
0 - 63=Off, 64 - 127=On
This control change is only for receive.
NRPN MSB/LSB (CC#98, 99)
Status
2nd Byte 3rd Byte
BnH
63H
mmH
BnH
62H
llH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
mm=upper byte of the parameter number specified by NRPN
ll=lower byte of the parameter number specified by NRPN
Data Entry (CC#6, 38)
Status
2nd Byte 3rd Byte
BnH
06H
mmH
BnH
26H
llH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
mm,ll=the value of the parameter specified by NRPN
Program Change
Status
2nd Byte
CnH
ppH
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
pp=Program Number:
00H - 63H, 7FH
(Patch #1 - 100, Manual)
Example of Patch operation
ex: select Patch U15
Bx 00 00 20 00 Cx 0F (x=Upper Channel)
ex: select Patch P87
Bx 00 01 20 00 Cx 3F (x=Upper Channel)
ex: select [Adjust B]
Bx 00 00 20 00 Cx 7F
(x=Upper Channel)
CHANNEL MODE MESSAGE
All Sounds Off (CC#120)
Status
2nd Byte 3rd Byte
BnH
78H
00H
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
When this message is received, all currently-sounding notes on the correspond-
ing channel will be turned off immediately.
Reset All Controllers (CC#121)
Status
2nd Byte 3rd Byte
BnH
79H
00H
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
When this message is received, the following controllers will be set to their reset
values.
Expression:
127
Glide:
0
Damper:
0
NRPN: unset; previously set data will not change
All Sounds Off (CC#123)
Status
2nd Byte 3rd Byte
BnH
7BH
00H
n=MIDI Channel Number:
0H - FH (Ch. 1 - 16)
When All Notes Off is received, all notes on the corresponding channel will be
turned off. However if Hold 1 or Sostenuto is ON, the sound will be continue-
duntil these are turned off.
MIDI INFORMATION
Summary of Contents for XK-5
