13
Advan ced Fea tures
Hammond XPK-100 Quick Features Guide
Current Parameter
Current Value
Current Parameter
Your Selected Value
Current Parameter
Current Value
TRY THIS - To transpose the XPK-100 using EDIT Mode:
1.
From PLAY Mode, press the PLAY/EDIT Switch once. The Information Center Display
should alternate between two messages as shown below:
2.
Press the PRESET/EDIT “
” Switch repeatedly until the Information Center Display
alternates between two messages as shown below:
NOTE:
You can also press the PRESET/EDIT “
” Switch to arrive at the same Advanced Feature selection.
3.
Now use the Pedal keys to select the Transpose value you want. The data chart below
shows how to do this.
TRANSPOSE OPTIONS
Transposition Interval
Action
No Transposition
Press the “Lo C” Pedal
Up 1 half-step
Press the “C
<
” Pedal
Up 2 half-steps
Press the “D” Pedal
Up 3 half-steps
Press the “D
<
” Pedal
Up 4 half-steps
Press the “E” Pedal
Up 5 half-steps
Press the “F” Pedal
Up 6 half-steps
Press the “F
<<
” Pedal
Down 5 half-steps
Press the “G” Pedal
Down 4 half-steps
Press the “G
<<
” Pedal
Down 3 half-steps
Press the “A” Pedal
Down 2 half-steps
Press the “A
<
” Pedal.
Down 1 half-steps
Press the “B” Pedal
4.
When you have made your selection, then press the Hi “C” Pedal once. The Information
Center Display will show you the current parameter alternating with your selected value:
5.
To exit the
EDIT
Mode
and
return
to
PLAY
Mode,
press
the
“Hi
C”
Pedal
again. The XPK-
100 is now transposed to the value you selected.
NOTE:
After doing the above, you will notice a small red dot between the first and second characters of
the
Information
Center
Display. This indicates that your new value has not
been
saved
to
a
Preset. For information
on how to save your settings to a Preset, see page 34.
6.
To continue editing, instead of
pressing
the
Hi
“C”
Pedal,
use
the
PRESET/EDIT
Switches
to
select
the
parameter
you
want
to
edit. When you are finished editing, press the “Hi
C” Pedal once to return to PLAY Mode. All of your changes will now take effect.