14
Advanced Features
Hammond XPK-100 Quick Features Guide
Current Parameter
Current Value
Current Parameter
Current Value
Ë
Advanced Feature - E02 Octave
This Advanced Feature allows you to select the Octave in which the XPK-100 will sound. You can select
from “-1" (down 1 octave) through “4” (up 4 octaves). The default setting is “0.”
NOTE:
The OCTAVE LED to the right
of
the
Information
Center
Display
will
light
whenever
the
XPK-100
is
set
to
play
in
any
octave
other
than
“0.”
TRY
THIS:
1.
From
PLAY
Mode,
press
the
PLAY/EDIT
Switch
once. The Information Center Display
should alternate between two messages as shown below:
2.
Press the PRESET/EDIT “
” Switch repeatedly until the Information Center Display
alternates between two messages as shown below:
NOTE:
You can also press the PRESET/EDIT “
” Switch to arrive at the same Advanced Feature selection.
3.
Now use the Pedal keys to select the MIDI Channel you want.
Using the DEC/INC Pedal keys:
Use the DEC (“A
<
”) Pedal key to decrease the Octave number selection.
Use the INC (“B”) Pedal key to increase
the
Octave
number
selection.
Using the other Pedal keys:
You can use
the
other
Pedal
keys
to
select
Octaves. The data chart below shows how to do this.
OCTAVE SELECTIONS
Octave Selection
Action
Unison
Press the “Lo C” Pedal
Up 1 octave
Press the “C
<
” Pedal
Up 2 octaves
Press the “D” Pedal
Up 3 octaves
Press the “D
<
” Pedal
Up 4 octaves
Press the “E” Pedal
NOTE:
Pressing the “F” through the “B” Pedals will have no effect.
