24
Advanced Features
Hammond XPK-100 Quick Features Guide
Current Parameter
Your Selected Value
4.
When you have made your selection, then press the Hi “C” Pedal once. The Information
Center Display will show you the current parameter alternating with your selected value:
5.
To exit the EDIT Mode and return to PLAY Mode, press the “Hi C” Pedal again. The
CONTROL Switch will now control the function you have selected.
NOTE:
After doing the above, you will notice a small red dot between the first and second
characters
of
the
Information
Center
Display. This indicates that your new value has not
been
saved
to
a
Preset. For information
on how to save your settings to a Preset, see page 34.
6.
To continue editing, instead of pressing the Hi “C” Pedal,
use
the
PRESET/EDIT
Switches
to
select
the
parameter
you
want
to
edit. When you are finished editing, press the “Hi
C” Pedal once to return to PLAY Mode. All of your changes will now take effect.
