25
Advan ced Fea tures
Hammond XPK-100 Quick Features Guide
Current Parameter
Current Parameter
Current Value
Your Selected Value
Current Parameter
Current Value
Ë
Advanced Feature - E09 CONTROL Sw. Mode
This Advanced Feature allows you to select how the CONTROL Switch operates . You can select either
"Alt" (Alternate - pressing and releasing the CONTROL Switch toggles between “ON” and “OFF”) or
“Mom” (Momentary - pressing the CONTROL Switch turns its function “ON,” while releasing the
CONTROL Switch turns the selected function “OFF”). The default setting is “Alt.”
NOTE:
The CONTROL LED to the right
of
the
Information
Center
Display
will
light
whenever
the
CONTROL
Switch
is
active.
TRY
THIS:
1.
From
PLAY
Mode,
press
the
PLAY/EDIT
Switch
once. The Information Center Display
should alternate between two messages as shown below:
2.
Press the PRESET/EDIT “
” Switch repeatedly until the Information Center Display
alternates between two messages as shown below:
NOTE:
You can also press the PRESET/EDIT “
” Switch to arrive at the same Advanced Feature selection.
3.
Now use the Pedal keys to select between Alternate and Momentary
Mode.
Use
the
WHITE
Pedal
keys
(“Lo
C”
“D”
“E”
“F”
“G”
“A”
and
“B”)
to
select
Alt
(alternate)
Mode.
Use
the
BLACK
Pedal
keys
(“C
<
”
“D
<
”
“F
<
”
“G
<
”
and
“A
<
”)
to
select
Mom
(momentary)
Mode.
4.
When
you
have
made
your
selection,
then
press
the
Hi
“C”
Pedal
once. The Information
Center Display will show you the current parameter alternating with your selected value:
5.
To exit the EDIT Mode and return to PLAY Mode, press the “Hi C” Pedal again. The
CONTROL Switch on the XPK-100 will now operate in the Mode you have selected.
NOTE:
After doing the above, you will notice a small red dot between the first and second
characters
of
the
Information
Center
Display. This indicates that your new value has not been
saved
to
a
Preset. For information
on how to save your settings to a Preset, see page 34.
6.
To continue editing, instead of
pressing
the
Hi
“C”
Pedal,
use
the
PRESET/EDIT
Switches
to
select
the
parameter
you
want
to
edit. When you are finished editing, press the “Hi
C” Pedal once to return to PLAY Mode. All of your changes will now take effect.
