background image

7

Front Panel Operation
1

Set temperature
Press „set“ button, the set temperature is displayed.
Press

or

button to modify and store the displayed value.

Press „set“ button to exit the adjustment and display the cold-room temperature.

2

If no more button is pressed within 10 seconds, the cold-room temperature will be displayed.

3

Illumination:Press

button, it lights; Press again, it stops.

Manual start/stop defrost:Press

button and hold for 6 seconds to defrost or stop defrost.

4

Refrigerant LED: During refrigeration, the LED is on; When the cold room temp. is constant, the
LED is off; During the delay start, the LED flashes.

5

Defrost LED: during defrosting, the LED is on; When is stops defrosting, the LED is off, During the
delay display of defrost, the LED flashes.

3. Cautions

Shorten the door open time and reduce open frequency is good to keep a cold temperature inside the
refrigerator.
Never block the air suction and outlet. Keep air circulation and refrigeration capability.
Do not make food congested as it will influence the cooling effect. Adjust the rack height for proper
food storage.
Cool the hot food down to room temperature before you put it into the refrigerator.
Try to reduce the open times and keep refrigerator inside cold in case the power is cut off.
Only skilled service man is allowed to repair the damaged power cable with special tools.
Never touch compressor to avoid from scald.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The operation manual are not suitable for the persons (including children) with reduced physical,
sensory or mental capabilities,or lack of experience and knowledge.

Summary of Contents for HA-900Z











Reviews: