Revised October 2021
4
Hampel, W194 N11551 McCormick Drive, Germantown, WI 53022
Phone: 262-255-4540 Fax:262-255-9731
L-rod
Assembly Instructions for Installation
Calf-Tel L-rod Bill of Material:
Item
Item Number
Description
Qty
1
CH-3332A-2
Fence L-rod
2
2
CT-9100-1
Fence Attachment Hardware
1
Tools Needed:
1. ½ in Socket & Ratchet
Installation Instructions:
Step 1:
Thread on a nut, lock washer
and then the fender washer. Insert
eyebolt into hole in side of hutch.
Step 2:
Large fender washer should be installed against the hutch on
the outside. Next, add a lock washer. A nut should be installed on top
of the lock washer. This helps adjust the eyebolt out to the correct
distance (approx. 1.5” to the center of the eye on the top and 1.75” to
the center of the eye on the bottom).
Step 3:
Install the large fender washer against the hutch on the inside
of the hutch. Then, add a lock washer and secure in place with a nut.
This helps tighten the eyebolt in place once the desired location is
established on the outside.
Step 4:
Fence is locked into position when the upper eyebolt and the
lower eyebolt are within one section on the fence. This keeps the fence
from moving forward and backward.
