Page 2
Thank you for purchasing this Hampton Bay interior portable luminaire. This
product has been manufactured to the highest standards of safety and quality.
The durable finish and shade design provide for care-free maintenance.
Simply wipe with a clean towel to keep looking showroom new.
FEATURES:
1. Durable easy to maintain finish; simply wipe with a clean soft cloth to
keep looking new.
2. On-off switch on table and accent lamp. Three-way switch on floor lamp.
Provides just the right amount of light where it is needed.
3. Popular E27 lamp holder may be fitted with a CFL equivalent energy
saving bulb.
QUESTIONS, PROBLEMS, MISSING PARTS
:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit
www.homedepot.com
. Please reference your
SKU 143-011 3 Piece Coffee Bronze Roomful when speaking to a Customer
Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire, spread all parts out on
a clean flat surface. Inspect each part for defects that may have occurred
during shipping.
Important
: Inspect the wire insulation for any cuts, abrasions or exposed
copper that may have resulted during shipping. If there is a defect in the wire,
DO NOT continue the assembly operation. Please call our Customer Service
Team at 1-877-527-0313.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY:
1 ea - 40 watt max. type A bulb (or CFL equivalent)
1 ea - 60 watt max. type A bulb (or CFL equivalent)
1 ea - 100 watt 3-way max. type A bulb (or CFL equivalent)
(Bulbs not included)
Page 3
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
Parts for Floor:
1 ea – Socket Assembly (A)
4 ea – Tube (B,C,DE)
1 ea – Base (F)
1 ea – Ring (H) 1 ea – Shade (G)
ASSEMBLY INSTRUCTIONS (Floor):
1. Screw Socket Assembly (A) clockwise into Tube (B)
until secure; pull any excess cord through Tube (B).
2. Repeat Step 1 for Tubes (C,D,E).
3. Screw Tube (E) clockwise into Base (F) until secure;
pull any excess cord through Base (F).
4. Place Shade (G) onto Socket Assembly (A). Secure by
screwing Ring (H) clockwise onto threaded socket.
5. Install 100-watt maximum 3-way Type A (or CFL
equivalent) bulb into Socket Assembly (A).
Parts for Table and Accent:
2 ea - Socket 2 ea - Tube (B) 2 ea - Base (C)
2 ea - Shade (D)
Assembly (A)
ASSEMBLY INSTRUCTIONS (Table and Accent):
1. Screw Socket Assembly (A) clockwise into Tube (B)
until secure; pull any excess cord through Tube (B).
2. Screw Tube (B) clockwise into Base (C) until secure;
pull any excess cord through Base (C).
3. Place Shade (D) onto Socket Assembly (A).
4. Install 60-watt (Table) or 40-watt (Accent) maximum
Type A (or CFL equivalent) bulb into Socket Assembly
(A).
