10
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
Open the Front Door (J) and cooler door, connect the
Front Door (J) to the cooler door with Screws (EE)
and Door Clip (GG), Use a Phillips Head Screw Driver
to tighten Screws (EE) through the pre-drilled holes
in the Door Clip (GG). Close door and adjust the wine
cooler forwards or backwards to insure a smooth
operation of the door with a tight seal.
Note: Installing the clip with the door open at a 45
degree angle will help insure a smooth operation
through the full motion of the door.
9
Cooler installation
Cooler installation
Insert Stabilizer Frame (K) once the cooler is in the
correct position. Fasten the positioning panel with
wood screws (FF). Wedge the Stabilizer Frame (K)
between the top of the cooler and mantel.
Fasten with wood screws (FF).
10
K