Turn of the Century
TM
5
ASSEMBLY INSTRUCTIONS
2
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
2. Remove the canopy from the mounting bracket
by removing the two mounting bracket screws from
the round holes in the canopy. Then loosen the other
two mounting bracket screws from the L-shaped slots.
Retain the mounting bracket screws for later. Install the
mounting bracket to the outlet box (not included) using
the screws and washers provided with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
3. Remove all ten motor screws from the underside of the
motor assembly. Discard the plastic motor blocks, but
keep the motor screws for later.
4.
CLOSEMOUNT INSTALLATION
(OPTIONAL)
a. Remove the canopy cover from the bottom of the
canopy.
b. Remove the three Phillips head closemount screws from
the top of the motor housing.
c. Align the holes in the bottom of the canopy with the
screw holes in the top of the motor housing. The larger
holes in the canopy will encompass the three pre-installed
screws.
d. Secure the canopy to the top of the motor housing with
the closemount screws that were previously removed.
e. Hang the fan on the hook of the mounting bracket.
Proceed to Step 9.
Closemount
Screw
Canopy
Mounting
Bracket
Motor
Block
Motor
Screw
Motor
Mounting
Bracket Screw
3
4
