background image

10

Assembly - Hanging the Fan (continued)

Wiring the fan to the receiver

6

 

If using the 4.5 in. ball downrod assembly (B) provided, 
wire the receiver to the fan wires by connecting the molded 
adaptor plug from the receiver (K) with the molded adaptor 
of the fan motor assembly (E) together.

 

If you wish to use longer downrod, you can use the extension 
lead wire (42 in.)(M) provided by connecting the molded 
adaptor together.

Wiring the receiver to the 
household wiring

5

WARNING:

 To avoid possible electrical shock, turn 

the electricity off at the main fuse box before 

wiring. If you feel you do not have enough electrical 

wiring knowledge or experience, contact a licensed 

electrician.

WARNING:

 Each wire nut supplied with this fan is 

designed to accept up to one 12-gauge house wire 

and two wires from the fan. If you have larger than 

12-gauge house wiring or more than one house wire to 

connect to the fan wiring, consult an electrician for the 

proper size wire nuts to use.

IMPORTANT:

 Use the wire connecting nuts (BB) 

supplied with your fan. Secure the connectors with 

electrical tape and ensure there are no loose strands or 

connections.

 

Spread the wires apart so that the green and white wires 
are on one side of the outlet box and the black wire is on the 
other side.

 

Connect the green fan wires to the household ground wire 
(this may be a green or bare wire) using a wire connecting 
nut (BB).

 

Connect the receiver (K) black (or red) wire to the household 
black (hot) wire using a wire connecting nut (BB).

 

Connect the receiver (K) white wire to the household white 
wire (neutral) using a wire connecting nut (BB).

 

Secure each wire connecting nut using electrical tape.

NOTE:

 The fan comes with 12 in. lead wires for use with 

the provided 4.5 in. ball/downrod assembly (B). If you 

wish to use longer downrod, you can use the extension 

lead wire (42 in.) (M) provided.

Black

Black

Green (or Bare)

Green

Outlet Box

Receiver

Antenna

White

Receiver (K)

BB (x3)

DIP

Antenna

Wi-Fi

Outlet box

in the ceiling

(SS)

Green

1 2 3 4

ON DIP

M

Summary of Contents for 52-LASO



















Reviews: