3
1
Installation
(
continued
)
AA
E
E
B19. Connect wires as shown using the wire nuts (AA).
B20. Install the wiring cover (C) using the wiring cover
screw (D). Make sure all wiring connections are inside
the box or under the wiring cover (C).
B22. Connect the wiring harness. DO NOT ALLOW THE
MOTOR TO HANG FROM THE WIRING HARNESS.
B21. Connect 4" duct and vent to the outside. Tape
joints. If ducting does not fit securely, an adapter may
need to be purchased.
B23. Reinstall the motor (E) by inserting the tabs and
pushing up into position. Make sure the wires are not
pinched between the motor and the housing.
C
D