Assembly — Hanging the Fan (continued)
13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
7a
Standard ceiling mounting
7b
Close-to-ceiling mounting
WARNING:
Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball (E) before
attaching the canopy (C) to the mounting bracket (A) by
turning the canopy (C) until it drops into place.
BB
LL
A
BB
E
BB
A
BB
B
C
B
C
□
Slide the canopy (C) up to the ceiling. Make sure you
have placed the wires safely into the outlet box (LL).
□
Secure the canopy (C) to the mounting bracket (A)
with the four canopy mounting screw with lock
washer (BB) included with your fan.
□
Slide the canopy ring (B) over the canopy (C) and
tighten by turning the ring (B).
□
Remove the fan from the hook on the mounting
bracket (A).
□
Secure the canopy (C) to the mounting bracket (A)
with the four canopy mounting screw with lock
washer (BB) provided.
□
Slide the canopy ring (B) over the canopy (C) and
tighten by turning the ring (B).
WARNING:
The locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy mounting screw with lock
washer (BB) are engaged and firmly tightened.
WARNING:
Locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy mounting screw with lock
washer (BB) are engaged and firmly tightened.
