HAMPTON BAY ASHBURTON YG593-WH, Use And Care Manual

Assembly — Attaching the Fan Blades

8

Removing the rubber 
packing mounts

14

G

NN

□

     The fan motor assembly (G) is shipped with rubber 

packing mounts (NN) to prevent movement during 
transportation. Remove the five rubber packing 
mounts (NN) from the fan motor assembly (G) and 
discard prior to attaching the blade arms (I).

9

Attaching the blades to 
the blade arms

□

     Hold the blade (H) with hands close to the blade arm 

(I), align the key-slot holes (OO) with the blade arm 
posts (PP) and press the blade down firmly. Ensure 
the key-slot holes (OO) are properly seated on the 
blade arm posts (PP).

□

     Firmly slide the blade (H) away from the blade arm (I) 

until the blade (H) engages in the spring locking 
mechanism (QQ). Make sure the spring of the spring 
locking mechanism (QQ) is upward and the butt of 
the spring locking mechanism (QQ) is against the 
edge of the blade.

NOTE:

Your fan blades are reversible. Select the blade side 

finish which best accentuates your decor.

To install the blade to the blade arm:

□

     Press down the spring locking mechanism (QQ) to 

release the blade (H) from the blade arm (I). Slide the 
blade (H) toward the blade arm (I) until the blade (H) 
disengages from the spring locking mechanism (QQ). 
Carefully push the blade (H) up to detach from the 
blade arm (I).

To detach the blade from the blade arm:

H

OO

PP

I

H

I

QQ

WARNING:

Failure to properly seat the blades (H) on the 

blade arms (I) and engage in the spring locking mechanism 
(QQ) could result in the fan blades (H) loosening and possibly 
falling.