Assembly
5
2
Attaching the back frames
3
Attaching the table top
□
Attach the table top (A) to the back frames (E and F) by using
three 1/4 in. x 60 mm bolts (CC) and two 1/4 in. x 20 mm
bolts (AA). Add a washer (DD) to each bolt.
□
Guide the bolts through the holes in the table top (A), into the
pre-drilled holes in the back frames (E and F).
□
Hand tighten only.
1
Attaching the support bar
□
Attach the support bar (D) to seat frame-1 (B) by using four
1/4 in. x 20 mm bolts (AA) and Ø6.5 x 1.0 mm washers (DD).
□
Guide the bolts through the holes in the support bar (D), into
the pre-drilled holes in seat frame-1 (B).
□
Hand tighten only.
□
Attach back frame-1 (E) to back frame-2 (F) by using 1/4 in.
x 30 mm bolts (BB) and Ø6.5 x 1.0 mm washers (DD).
□
Guide the bolts through the holes in back frame-1 (E), into the
pre-drilled holes in back frame-2 (F).
□
Hand tighten only.
4
Attach the leg
□
Attach the leg (G) to the back frames (E and F) by using four
1/4 in. x 20 mm bolts (AA) and washers (DD).
□
Guide the bolts through the holes in the leg (G), into the
pre-drilled holes in the back frames (E and F).
□
Hand tighten only.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
B
EE
G
AA
DD
EE
A
CC
EE
AA
DD
E
F
DD BB
EE
G
DD
AA EE