8
Attaching the Fan Blades
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
Figure 11
Blade Arms
Screws with
Fiber Washer
Blade
Figure 12
Motor
Tab
Slot
Blade Arm
Attach blades to blade arms using three screws
with fiber washers (Fig. 11). Start a screw into
the blade arm, do not tighten. Repeat for the 2
remaining screws and washers.
Tighten each screw securely starting with the
center screw. Make sure the blade is straight.
Repeat steps for the remaining blades.
Fasten the blade assemblies to the motor by
lining up the slots of the blade arms with the
tabs on the motor, then tighten the two screws
and washers already installed in the blade arms
(Fig. 12).
Repeat procedure with remaining blade arms.
1.
2.
3.
4.
Summary of Contents for Edgemont 324-848
Page 2: ...Edgemont by Hampton Bay ...
