10
Problem
Possible Cause
Solution
The lights stay on continuously.
□
The motion sensor may be picking up
a heat source like an air vent, dryer
vent, or brightly painted, heat-reflective
surface.
□
Decrease the “SENS”
setting or reposition the
motion sensor.
□
The motion sensor is in manual mode.
□
Switch the motion sensor
to auto. See
Using Manual
Mode
on page 8.
□
The light fixture is wired through a
dimmer or timer.
□
Do not use a dimmer or
timer to control the light
fixture. Replace the dimmer
or timer with a standard on/
off wall switch.
□
The light fixture is on the same circuit
as a motor, transformer, or fluorescent
bulb.
□
Install the light fixture on
a circuit without motors,
transformers, or fluorescent
bulbs.
The lights flash on and off.
□
Heat is being reflected from other
objects and may be turning the motion
sensor on and off.
□
Reposition the motion
sensor.
□
The motion sensor is in “TEST” mode
and warming up.
□
Flashing is normal under
these conditions.
□
The CFL bulb may not be a dimmable
type bulb.
□
Use only dimmable self-
ballasted CFL (SBCFL)
bulbs.
Troubleshooting (continued)
