Assembly
(continued)
3
Attaching the chair back to the seat and arms combination
7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pleace the chair back (A) on the ground, attach the seat and arms combination (B,C&D) to the chair back (A) .
For the arm top area using bolts (CC) and metal washers (DD) from the side of the top, throught the holes on arms to the pre-drilled
holes on the top side of chair back. Do not tighten completely until assembly is completed.
AA
Bolt (M6 x 30 mm)
Metal Washer (
Φ
16*1.0mm)
DD
EE
2
Quantity
Description
Part
2
Allen Wrench (M6)
1
IMPORTANT:
Do not tighten completely until assembly
is completed.
IMPORTANT:
Do not tighten completely until assembly
is completed.
CC
Bolt (M6 x 75 mm)
Metal Washer (
Φ
16*1.0mm)
DD
EE
2
Quantity
Description
Part
2
Allen Wrench (M6)
1
For the arm bottom area using bolts (AA) and metal washers (DD) from the inner side of the bottom, throught the holes on chair seat
to the pre-drilled holes on the bottom side of each arms. Do not tighten completely until assembly is completed.
D
C
B
A
AA
EE
DD
DD
CC
EE
