Care and Cleaning
Troubleshooting
Warranty
q
Clean the fixture with a soft, dry cloth.
q
Do not use any cleaners with chemicals, solvents or harsh abrasives.
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of two (2) years from the date of
purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is found to be
defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the
instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,
alteration or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any
portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
If the light does not turn on at dusk after 8 hours of charging :
q
Ensure that the solar light is in a bright sunny location and not in a shady area during the day.
q
Make sure that the light’s photocell is not affected by other light sources at night.
q
Ensure that the pull-tab has been removed.
q
Verify that the battery/batteries are making contact with the terminal and that they have been inserted in the correct polarity.
