6
Installation
1
Installing the cross bar
2
Connecting the wires
□
Turn the power off at the main fuse box.
□
Install the cross bar (BB) with nipple (DD), lock nut
(FF), and screw collar loop (HH) to the outlet box
using two outlet box screws (CC).
□
Slide the screw collar nut (II) and then the canopy
(GG) onto the end of the chain (JJ).
□
Fasten the end link of the chain (JJ) to the screw
collar loop (HH).
□
Insert the fixture wires up through the nipple (DD).
□
Install the fixture copper ground wire (KK) under
the ground screw (EE) on the cross bar (BB).
□
Connect the fixture and supply copper ground
wires (KK) in the outlet box using a wire nut (AA).
□
Connect the white (or ribbed) fixture and white (or
ribbed) supply wires (LL) in the outlet box using a
wire nut (AA).
□
Connect the smooth fixture and black (or red)
supply wires (MM) in the outlet box using a wire
nut (AA).
JJ
BB
DD
HH
II
CC
GG
FF
LL
AA
KK
EE
AA
BB
AA
MM
