Remove the three light kit mounting screws (OO) from the
light kit (H) and keep these screws.
While holding the light kit (H) under your fan motor assembly
(E), locate two single white and blue wires in the switch
housing labeled "FOR LIGHT". Make the polarized plug
connections (PP):
White to white
Blue to black
Carefully push all wires back into the switch housing. Install
the light kit (H) onto the switch housing with the three light
kit mounting screws (OO) provided. Be sure to tighten all
screws.
14
Assembly — Installing the Light Kit
Attaching the light kit to the switch
housing
11
Installing the light bulbs
12
E
OO
H
PP
Install two 7.5 watt LED bulbs (CC) (included).
CAUTION:
Before starting the installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
CAUTION:
Before starting the installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
CC