HAMPTON BAY Minuet III AG806C-EB, Owner'S Manual

11

Installing the Light Kit

Fan without Light Kit

(Optional)

CAUTION

BEFORE STARTING INSTALLATION, DISCO-

NECT THE POWER BY TURNING OFF THE 

CIRCUIT BREAKER OR REMOVING THE FUSE 

AT FUSE BOX. TURNING POWER OFF USING 

THE FAN SWITCH IS NOT SUFFICIENT TO 

PREVENT ELECTRIC SHOCK.

While holding the light kit assembly under 
your fan, locate two single white and blue 
wires in the switch housing labeled "FOR 
LIGHT". Make the polarized plug connections:
- White to white
- Blue to black

Carefully push all wires back into the switch 
housing, then install the light kit assembly onto 
the switch housing with 3 screws provided. Be 
sure to tighten all screws. (Fig. 20)

Install 60 watt (Max.) medium base bulb (not 
included). (Fig. 20)

Mount the glass shade to the light fixture by 
unscrewing partway the thumbscrews on the 
glass holder, insert the glass, then gently 
tighten the thumbscrews by hand evenly to the 
glass. DO NOT OVER TIGHTEN. (Fig. 20)

Disassemble the switch housing cover from the 
light kit, you can keep the light kit for future 
use.

Attach the plastic plug to the switch housing. 
(Fig. 21)

Install the switch housing cover to the switch 
housing with screws provided.

1.

2.

3.

Figure 20

Figure 21

Light Kit 
Assembly

Bulb

Glass Shade

Thumb Screws

Switch 
Housing

Wire Connectors

Screws

Switch Housing 

Cover

Plastic Plug

Switch Housing

1.

2.

3.

4.

5.

NOTE

REQUIRES ONE INCANDESCENT BULBS, OR 

CFL OR LED BULBS EQUIVALENT 60W (MAX.)

Restore power and your light kit is ready for 
operation.