10
Assembly (continued)
7
Assembling the Burner
Assembly
8
Assembling the KD and Top
Dome
□ Thread the regulator assembly preassembled to the
burner assembly (C) through the pole assembly
(D). Once the burner assembly (C) rests on the
pole assembly (D), secure with M5 x 8 mm silver
bolts (GG).
□ Attach the KD domes (B) using M5 x 8 mm bolts
(GG), M5 nuts (HH) and 5 mm washers (II). Then,
complete the dome assembly by attaching the top
dome (A) to the KD domes (B) with M5 x 8 mm
silver bolts (GG), M5 nuts (HH) and 5 mm washers
(II).
B
HH
II
GG
A
HH
II
GG
D
C
GG
