HAMPTON BAY SOUTHBOURNE DSHD19522Z, Use And Care Manual

Installation

5

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installing the crossbar assembly

1

□

Secure the crossbar assembly (AA) to the outlet box (not 

included) with the outlet box screws (BB). Tighten until 

snug.

Outlet box

NOTE: 

The preassembled mounting screws on the 

crossbar should protrude outward.

2

□
□

□
□

□

NOTE: 

 The backplate on the fixture body (A) should be snug 

against the wall and the mounting balls (1).

AA

BB

A

1

AA

Testing the backplate fit to the crossbar assembly

Remove the mounting balls (1) from the crossbar assembly (AA).

Fit the backplate on the fixture body (A) to the crossbar assembly (AA) and secure with the mounting balls (1).

If they do not align, adjust the length of the mounting screws on the crossbar assembly (AA) by unscrewing the preassembled hex 

nuts.

Screw the mounting screws in or out of the crossbar assembly (AA) until the desired length is achieved.

Once the backplate on the fixture body (A) is secure, remove the mounting balls (1) and the fixture body (A) and proceed to Step 3.