7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
6
Attaching the fixture frame
to the top cover
7
Applying caulk
□
Carefully place the each glass sheets (E) into the
fixture frame (F).
□
Align the fixture frame (F) under the top cover (B).
□
Use a Phillips screwdriver to screw the pan
screws (G) into the holes on the top cover (B).
There have holes of the top cover (B) each corner.
□
Once the fixture is mounted on the wall, caulk the
space between the wall and the upper 3/4 area of
the wall plate (I).
□
Leave the bottom 1/4 area uncaulked for drainage
of any water which might leak into the enclosure.
Care and Cleaning
□
Clean the fixture with a soft, dry cloth.
□
Do not use any cleaners with chemicals,
solvents or hash abrasives.
Troubleshooting
Problem
Possible Cause
Solution
The bulb will not light.
The power is off.
Ensure the power supply is On.
The circuit breaker is off.
Ensure the circuit breaker is in the On position.
The fuse blows or circuit
breaker trips when the light is
turned on.
Crossed wires or power
wire is grounding out.
□
Check the wire connections.
□
Contact a qualified electrician or call the
Customer Service Team at
1-855-HD-HAMPTON.
WARNING:
Before attempting to clean the fixture,
disconnect the power to the fixture by turning the
breaker off or removing the fuse from the fuse box.
