Operation (continued)
6
Attach the crank (E) without using the tap as shown in figure 1. To detach the crank (E), just take the crank out.
Attach the crank (E) to the handle as shown in figure 2. Attach the crank (E) by aligning the tap with the hole on the crank
(E) until it snaps into place. To detach the crank, the hex wrench (FF) is required to press the tap to take the crank (E) out.
Care and Cleaning
For best results, clean the umbrella with damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the umbrella, sheltered place when not in use.
ind.
20
1.
2.
1.
2.
Attaching and detaching the crank
Figure 1
Figure 2
